What can you make sakura flowers from? DIY sakura branch. Beautiful sakura made from foamiran with your own hands

And what could be more tender and romantic than? It will serve as a wonderful decoration for almost any interior. Few people can argue with the fact that a sakura branch looks elegant and sophisticated. In Japan, sakura is a symbol of spring; there is even a spring holiday called “hanami,” which means “viewing flowers.”

Park paths, sidewalks and courtyards are strewn with sakura petals. How can one not become a sophisticated esthete? I also wanted spring to come as soon as possible, if not outside, then at least at home. But, unfortunately, sakura does not grow here, so I decided to make a sakura branch with my own hands.

What did I need for this?

• Branch from the street, branchy
• Glue moment. You can use any good glue.
• The napkins are light pink, preferably multi-layered.
• White gouache (beige, optional)
• Brushes
• Scissors
• Pen
• Needle and thread (optional)
• Inspiration =)

So, first I painted the branch white, mixing it a little with beige to make the branch look more delicate and natural.

While the branch was drying, I drew flowers on a napkin and cut them out.

You can also use crepe paper if you wish. Another option for making homemade sakura can be a branch twisted from wire.

You can also glue artificial flowers onto it. This branch is good for decorating a wall, a door to a room, and you can also put it in a vase.

It is better to sew flowers in the center, at least a little. And let the tail of the thread stick out a little. This looks more like a real sakura flower and is easier to glue because it doesn’t fall apart.

The flowers are then artistically glued onto the branch. Even a child can make it. This is a very exciting process that delivers real aesthetic pleasure.

This is what happened in the end! ready.

In my opinion, quite in. Such an elegant branch can decorate a bedroom or a coffee table in the living room. All you have to do is order sushi, and life will be filled with bright colors again!

To make such sakura branches for the interior, you will need a minimum of time, labor and expense. Sakura made from napkins is a great idea for decorating your home. Sakura is a symbol of youth and beauty. The Japanese are very sensitive to its flowering. In Japan there is such a holiday as hanami. Hanami is a tradition of picnics under cherry blossom trees. Sakura also symbolizes the transience of time, because it does not bloom for long. Let's make sakura branches with our own hands. Let them please the eye at any time of the year.

For work we will need:

1. Branches of any bush - 9 pieces.
2. Thin wire or glue.
3. Napkins are pink and white.
4. White gouache.
5. Brush.
6. Scissors.
7. Needle and white thread.

First, let's prepare the branches. Shake off debris and remaining leaves from the branches. The branches must be dry and clean.

We paint the branches with white gouache to make them look lighter.

Decide how many flowers you want to make; there should be no more than 11-13 flowers on one branch.

Using a needle and thread, carefully sew 6 circles together. Sew in the center of the flower.

Attach a thin wire to the center of the flower. The wire is needed to secure it to the branch.

Then we take one layer of the flower and, lifting its edges towards the middle, compress it. We do this with all subsequent layers. Next, slightly straighten the flower. We make as many flowers as needed for sakura.

We attach our flowers to the branch with wire. If the wire stands out and is visible, you can tint it with white paint. If you don’t want to use wire, you can glue the flowers with glue by a thread to the trunk.

Mysterious sakura and the romance of oriental exoticism attracts many. And today we suggest spending a little time with pleasure to create a few sakura branches with your own hands. And if you make a bouquet, you will get a wonderful element of interior decor, suitable for decorating a living room or a school classroom.

Considering the simplicity and accessibility of the technique used to make the flowering branches, children of middle and high school age can handle their creation.

To make sakura from paper with your own hands, you will need:

soft pink corrugated paper for creating sakura flowers;

corrugated paper of any green tone;

wire to create a branch frame;

gouache, acrylic or watercolor paints.

Sakura made of paper: master class

We start the work with the frame: the base of the sakura branch. For this, we take a long piece of wire and wrap it with a small-width tape cut from corrugated green paper.

We cut two shorter pieces of wire: we also wrap them with green paper tape. We glue the ends with a pencil so that they do not unwind.

Give the branch a natural curved shape and attach smaller branches to it.

We fix them with a strip of corrugated paper, bandaging them in the right places.

The paper frame for the sakura branch is ready, and we begin to create the flowers themselves.

Cut a strip 2-3 cm wide from a roll of soft pink corrugated paper.

In order for the sakura petals to look natural, we give them a convex shape.

Glue the finished petals to the tips of the branch.

To create one sakura flower you will need four petals. We fix the base of the inflorescences with thread.

We process the receptacle of each flower with a piece of green crepe tape, masking the winding with thread.

We bend small branches, imitating the natural curves of sakura.

As you probably know, cherry blossoms occur before the leaves bloom, so there is practically no foliage on its branches. Here and there you can see small unblown leaves near the branching branches. We cut out these mini-leaves from green crepe paper.

We place them at the base of each small branch.

We also decorate the receptacle of the buds with them.

Every person strives for beauty in his soul, and flowers are one of the most wonderful manifestations of beauty. They fascinate, enchant, awaken great feelings and inspire. If you want to surround yourself with beauty, try following this simple master class, and delicate sakura flowers will be born in your hands from ordinary paper.

For work, prepare:

Watercolor paper;
- scissors;
- watercolor paint;
- PVA glue:
- brush;
- wire.
- white threads;
- fork;
- semolina crepe.

Prepare a petal template by drawing it on paper or cardboard, then you need to cut out the petals according to the template; for each flower you will need 6 petal blanks from watercolor paper. Paint the petals in the desired color (for example, soft pink). Then, while the petals are wet, take the twisted wire and create a vein texture on each petal by running the wire from the base to the top. Crumple the bottom of the petal and fold the top down slightly.

The stamens are made from ordinary white thread; it must be wound around a fork, then one end is cut and the other is fastened in the middle. Fluff the threads and carefully dip them into PVA glue, then into semolina. Wait for the glue to set and paint the stamens yellow. You can glue the petals onto pre-prepared cones made of plain paper, but you can just do it without additional equipment. First, collect three petals, immediately insert the stamens into the middle, then collect three more petals in a second layer between them.

These are the wonderful flowers you will get! A good mood is guaranteed to you!

In Russia, March 8 is considered a holiday of spring, flowers and awakening nature, and in Japan it is the Sakura Festival, which the Japanese spend in gardens and parks admiring the flowers. In our area, fruit trees will not bloom soon, but a branch of sakura with delicate pink flowers can be a wonderful gift for your mother, grandmother or sister on March 8th - and at the same time an interior decoration. We tell you how to make such an unusual craft with your own hands.

You will need:

• corrugated paper in pink (or white), yellow and green
• a strong branch of a beautiful shape (we have leftover from a winter composition - that’s why it’s white)
• threads to match the green paper
• semolina
• PVA glue
• scissors

Blanks for flowers

Cut out rectangles from paper. For one flower you will need: one yellow rectangle (about 1.5×2 cm) for the stamens, one green (1.5×1.5 cm) for the sepals and 5 pink (1.5×2.5 cm) for the petals.

How to make stamens

1. On the yellow rectangle along the long side we make several cuts reaching to the middle.
2. We twist each piece of the resulting fringe.
3. We have stamens.
4. We roll the yellow blank into a tube and dip the tips of the stamens first in PVA glue.
5. And then - into semolina.
6. We are waiting for it to dry. Stamens with pollen are ready.

How to make petals

1. Take a pink piece of corrugated paper (size 1.5x2.5 cm).
2. We cut off its upper part in a semicircle and carefully stretch the folds in the upper part of the petal so that it acquires a convex shape.
3. We twist the lower part of the petal - we will attach the flower to it.

Collecting a flower

1. Lay out the preparations in front of you
2. We collect pink petals around the yellow center.
3. On the outside, we wrap the junction of the petals with a green sepal and wrap it with thread for strength.
4. We tie the thread into two knots, leaving two “tails” of 5 cm each.
5. We straighten the flower petals.
6. We tie the flower to the branch with the remaining “tails”.

The task may seem slow, but if you divide the operations between several people, you can get it done in an hour. This is what happened with my son and daughter: Katya made the stamens, and Vitya stamped the petals as if on a conveyor belt. All I had to do was collect it all together and tie it to a branch. In one evening, our room was transformed and began to resemble a corner of Japan! The result is a real cherry blossom - but you can create another tree with similar flowers - cherry, apple, pear.