How to make a decorative balloon with a basket. How to make a ball. DIY balloon. Your own balloon: instructions

An original balloon for decorating a children's room can be made from paper with your own hands! To construct such a voluminous craft, it will take very little time.

This step-by-step master class will help you learn how to make a paper balloon without much effort!

To create a craft you will need the following materials and tools:

- colored paper or cardboard;
- scissors;
- paper clips;
- glue stick.

To create this craft, you can use both colored paper and colored cardboard. In this case, the ball will be made of medium-density cardboard.

You can choose the shades of the ball at your discretion. From each sheet you need to cut out the following blanks for the base of the ball and basket.

To do this, the ends of the lower workpiece must be carefully “brought” to the top.

The first row is ready!

Then, in the same way, create the second row of the ball, drawing out the stripes of the upper workpiece.

Gradually, the ball will begin to take on the required shape.

Afterwards, the ball should be woven in this way until the end.

At the same time, each row must be secured with paper clips and the strips carefully pulled together.

In the end, we got this ball!

Then, so that it does not lose its shape, its bottom must be fixed with glue. Glue is applied to the tip of each strip, and then they are glued to the bottom part.

Gradually you need to remove all the paper clips.

The top of the ball is complete!

Now, from the previously cut blanks you need to create the lower part of the ball. To do this, you need to connect the first part into a ring using glue.

Then, apply glue to the inside of it and attach it to the ball.

Afterwards, leave until the glue dries completely!

In the meantime, you can create a cart! Along the notches on the bottom of the basket, you need to bend the edges.

Apply glue to the edges and sides and connect them.

Now the final stage remains in creating a balloon! The basket should be connected to a balloon.

Glue is applied to the ends of the thin strips, and then they are fixed from the inside of the basket.

The result is such an original balloon!

The final look of the craft. Photo No. 1.

The final look of the craft. Photo No. 2.

It will complement the interior of a children's room well, becoming an interesting decorative element! Balloon sizes can be very diverse!

The final look of the craft. Photo No. 3.

How to make a balloon with your own hands?

Flying in a hot air balloon is an exciting activity with which you can diversify your weekends or holidays. There are companies that provide balloons for rent, so it is best to use their services. If you are interested in the process of making a balloon in theory, or you want to make a miniature balloon, then our article will reveal to you all the intricacies of this process.

Let's consider the manufacturing process of each element of the balloon separately.

How to make a hot air balloon dome with your own hands

The balloon dome is best made from durable nylon materials (polyester or polyamide). So that the fabric does not allow air to pass through, on the outside of it need to be coated with polyurethane or silicone. The dome is sewn together from segments, the number and dimensions of which depend on the size of the balloon. In this table on the website sdelai-sam.pp.ua you can find the sizes of segments for diameters from 1 to 3 meters. To make a ball of larger diameter, calculate proportionally the size and quantity of the corresponding segment.

The base of the dome - the inflation hole - must be protected with a tape made of heat-resistant fabric. At the top of the dome it is necessary to provide a parachute valve through which heated air will be released to lower the ball. For greater strength of the dome, you can sew ribbons vertically and horizontally. At the top the tapes are attached to the parachute valve ring, and at the bottom to the suspension ropes.

Balloon basket

The basket is made from wooden wicker, and its bottom is best made from sea plywood, which tolerates moisture well. The frame for the basket can be stainless steel cables that attach the basket to the dome. It is best to wrap these cables in leather covers to protect them from damage.

Balloon burner

This is the most important part of the balloon and must be selected with special care. These burners use liquefied propane as fuel. They are made of stainless steel with special protective covers.

Balloon assembly

The most difficult thing is to make a mechanism for opening the parachute valve, however, in specialized sports clubs, for example, aeronavt.1gb.ru, you can find recommendations on the design of this mechanism. The assembly sequence is as follows:

1. We attach the steel cables to the lower rim of the dome and the basket using bolts.
2. The burner is mounted on a rigid frame above the basket.
3. The cords for controlling the parachute valve are attached to the cables.
4. Inside the basket there are containers for storing cards, a fire extinguisher and provisions.

Who hasn't dreamed of riding a hot air balloon as a child? Any child in the game imagines himself as a conqueror of the skies and wanted to sit in a flying ball. Games like these are very important for a child’s development, and you can help him with this. It is not necessary to buy him expensive models of balloons. It will give him much more pleasure to make such a craft himself. Let's find out how you can make a balloon with a basket with your own hands. You can make it together - your baby will receive a lot of positive emotions from the creative process, and then he will be able to play with the resulting toy.

Let's start creating

For the ball itself, you will need a model - newspaper or other paper, just don’t take thick one. How to make a large balloon with a basket of cardboard and other paper?

1. Tear the paper into pieces and soak in a container of warm water.
2. Inflate a balloon of the size you need - it will be the base. Lubricate it with hand cream.
3. Place a layer of wet newspaper without glue over the entire surface of the sphere so that there are no gaps. Just leave a small area free at the tail.
4. Coat the entire ball with glue and lay out another layer of paper.
5. Make 4 layers this way.
6. Leave the base of the craft to dry in a warm place.
7. When the product is completely dry, it needs to be primed. To do this, mix gouache with glue and apply it over the entire surface. Choose the color you like.
8. Now pierce the ball with a needle. It will come unstuck from the inside and fall out.

Now you can paint and decorate it as you wish.

Making a basket

What can you make a basket from?

• You can make it out of a tea box. Cut off the lid and cover the box with colored paper.

Important! If desired, the inner surface can also be pasted over or painted with paints.

• You can make a paper basket using the origami principle. To do this, cut a square out of paper, divide it into 3 parts and fold it. Divide and fold it on the other side in the same way. Now fold each corner diagonally and form a cube. Make holes in the corners of the basket and pull the ribbon through two holes diagonally. Connect the other two holes with an X.

Important! The free ends of the tape can be used to tie the basket to the ball.

• You can use plastic buckets of suitable size. And if you put small toys in them, the craft will become even more realistic. And if you plant figures of Father Frost and the Snow Maiden in them, then such a craft will bring a festive atmosphere to your home.

Balloon made from a light bulb

We often throw away old and seemingly unnecessary things, without thinking that they can be turned into something interesting. For example, burnt out light bulbs. It turns out that you can use them to make a DIY balloon with a basket. This is absolutely easy to do - even a child can handle it under your strict guidance:

• Degrease the old burnt out light bulb.

Important! The more original its shape, the better. You can degrease it with alcohol.

• Now it needs to be painted. Choose the color you like and decorate the light bulb.
• Use a cork as a basket, or make one out of paper.
• Glue the cables to the basket. Their role will be played by thick threads. You can intertwine several threads together.
• Draw patterns on the light bulb and attach the basket.

Important! You can make a loop and attach it with superglue to hang your craft.

Video material

These are the ideas that will help you become the creator of a real hot air balloon, albeit a small one. We wish you successful results of your creative work!

A flying balloon is perfect for any holiday event. Typically, commercial flying balloons are filled with a light, volatile gas such as helium. It is almost impossible to obtain such gas at home without special equipment. But helium is not the only gas that can be used for such purposes. At home, you can easily obtain hydrogen, which is also suitable.
But here it is worth considering that hydrogen is extremely explosive, so it is undesirable to make more than one ball. In general, the entire experiment must be carried out outside the home and in the open air.

Will need

For the experiment we will need:

• - aluminum foil,
• - pipe cleaner (Titanium, Mole) - Caution! Alkali!
• - plastic bottle,
• - a bucket of water,
• - rubber ball,
• - funnel,
• - water,
• - etc.

Making a flying ball with your own hands

When conducting the experiment, be sure to use rubber gloves and special glasses to protect your eyes!
First of all, roll the kitchen foil into small strips and cut into small pieces. And collect it in a small plastic cup.

We got 7 grams, you can take more foil, the reaction will proceed faster and there will be more hydrogen.

We also take a pipe cleaner (TITANIUM or MOLE) in granules, 19 grams is enough for us. Be careful this is a caustic substance, wear rubber gloves. If you get it on your hands, rinse thoroughly with water.

Next, take a plastic bottle, fill it one-third with water, and lower it into a bucket of cold water. For convenience, we take a funnel and pour our aluminum crumbs and pipe cleaner into the bottle, after which we quickly put the ball on the neck of the bottle so as not to release the hydrogen. It is better to insulate the neck of the bottle with electrical tape.

The reaction begins, the balloon is completely inflated in about 15-20 minutes, the plastic bottle is heated and so that it does not melt from overheating, it is dipped into a bucket of cold water.

As a result of the reaction of aluminum, sodium hydroxide and water, sodium tetrahydroxyaluminate and hydrogen are formed, which inflates our balloon.

When the ball is inflated, we squeeze the bottle so that part of the hydrogen from the bottle goes into the ball, twist the tail tighter and remove the electrical tape, after which we remove the ball from the neck.

We rinse the tail with water; if our balloon is not fully inflated, you can inflate it a little like a regular balloon.

We ask someone to hold the ball and tie the tail tightly.

The ball flies very well and will delight you and your children. To prevent the balloon from deflating in half a day, use a gel for flying balloons, for example, “hi float”.

Conclusion

At the end of the experiment, I would like to add that such a ball will descend to the ground after about 6-12 hours of flight. To increase this time, you can use a special gel, which is sprayed in specialized stores that sell such balls.
Be careful: a pipe cleaner (Titanium, Mole) is used to make the ball - this is a caustic alkali, be extremely careful!
Also, do not bring the inflated balloon close to the fire. Otherwise, the hydrogen in the ball will make a loud bang.

In our article you can find interesting crafts paper balls for all occasions. For example, you have a celebration at home, and you need to decorate the apartment. DIY paper balls are an excellent and inexpensive option.

You can, of course, make a beautiful ball using the origami technique, you can sew it from bright scraps, but making a three-dimensional inflatable balloon that would depict a model of a balloon is perhaps easier and faster. You can download a ready-made stencil for cutting, or you can make it yourself to the required dimensions.

All crafts vary in complexity from simple to unusual. Have a wonderful job and good mood.

First option.

In our master class we will show you how to create a festive paper ball with your own hands. To do this, we need a piece of white and always multi-colored paper, sharp scissors, and glue.

• First step. First, you need to print the template in duplicate (on white and multi-colored paper) using a printer.
• Second step. Then, of course, you need to cut it out templates and lay them out in the shape of a “sun”.
• Third step. Glue the cut circle into the middle, connecting all the rays in one place. Fourth step.
• Now let's move on to creating the ball. The color template is on white. Then we will connect the white rays with the colored ones.
• Fifth step. After this, it should look like white rays will lie on top of the colored ones, now they need to be hidden again under other rays.
• Sixth step. This is such a beautiful ornament that you can get if you intertwine different rays.

Seventh step. At the end, we will attach the rays and secure them together at one point.

How to create a paper ball with your own hands, master class

The second option for creating a ball is a smaller model - do it yourself.

• Now we will figure out how to make a magnificent ball with your own hands from different papers. To do this, we need three sheets of different shades, a circle template, a pencil, and sharp scissors. Cut out four identical circles from one color, and do the same with other colors. You should end up with twelve circles of the same size.
• Let's add the circles in the order we need: two circles of the same color (for example, 2 blue), then put two circles of a different color on them (for example, 2 pink), after that, for example, two blue, and repeat in the same order. Then we bend them in half. You can put a thread in the middle if the ball needs to hang.
• We fasten the middle with a stapler in different places. Let's divide one semicircle into three equal parts. Apply glue diagonally to the top 1/3 of the circle.
• Then we glue it to the adjacent part. Then, with a new semicircle, we will also divide it into three parts and apply glue to the lower 1/3 part and connect it to the other. And thus, with all the semicircles, alternating, gluing all sides. This is how you easily get a chic ball, created with your own hands, which you can hang on the New Year tree or decorate your room with it.

Products in the shape of a balloon, master class

Crafts in the shape of balloons look very cute. They can be made from paper, felt and even a light bulb.

We often throw away unnecessary lamps, but we do it in vain, since we can make beautiful crafts from them.

Now we will look at how to create balloons from different light bulbs.

For work, we will need the following materials:

• Unnecessary light bulbs.
• Paints for working with glass.
• Available materials for creating a basket.
• Threads.

First, the light bulb must be degreased, so that the paint lays evenly. Let's cover the light bulb with a background.

While it cools, you can make a basket. From paper, from corks - whatever your imagination can do. We will attach strings of a certain size to the basket. When the background of our product is dry, we need to complete the details. Let's connect the basket with the ball. You can make a loop on top of superglue or other glue to hang the ball.

Such balloons can also be created using knitting, stained glass and various improvised means.

Felt balloon.

It is quite simple to sew an air balloon from felt, but it looks very beautiful and impressive.

For this we will need pieces of felt, a pattern, cardboard to create a template, thread and cardboard for the basket and, of course, sewing parts.

First, we will cut out 8 wedges according to the template, taking into account the allowance and one circle.

Then everything is simple: we’ll make wedges and a circle, turn the product inside out, fill the ball with cotton wool, decorate it with a basket and slings (threads).

The balloon is made of felt.

Decor with balloons.

Balloons have long come into our lives. They decorate weddings and other celebrations and give them as gifts. With the help of balloons, many make marriage proposals.

An unusual way to congratulate a person is quite simple. We will need a large box, wrapping paper, balloons, which are inflated with helium. It is advisable that there is a present at the bottom of the box. Such a surprise is created before delivery. The required number of balloons is inflated and closed in a box. When the box is opened, the balls take off sharply!

You can make paper balloons with your own hands, both for launching and for decorating premises in everyday life or for the holidays. Conclusion. I hope that after our detailed article, you finally understand how to make balloons from different materials.