How to make a red rose out of paper. Paper roses: several simple options. This will require

The rose is rightfully considered the queen of flowers - neither adults nor children can resist its beauty. Therefore, these flowers, made from various materials - plasticine, modeling mass, salt dough and, of course, are often used to decorate crafts and make souvenirs. If you know how to make a rose from, you can decorate a variety of products with your own hands. Let's look at a few simple options for making it.

Paper spiral rose

The first option is so simple that even a child can cope with the task. All you need is a simple pencil, a little glue and a CD. The disc is traced in a circle onto a piece of paper.

The resulting circle is cut along the contour.

A spiral line is drawn from the edge of the circle to the center. Even if it doesn’t turn out to be particularly even, that’s okay, rose petals aren’t particularly symmetrical either.

The sheet is cut along the drawn lines, turning into a spiral.

This spiral is neatly twisted into a tube.

The edges of the rose unfold. Glue it to the disk. Several green leaves are cut out of green paper and glued to the disk. Ready!

Rose made from wavy paper spiral

The second option on how to make a rose out of colored paper differs from the first only in that after obtaining a spiral, one of its edges is given a wave-like shape.

In this case, the workpiece turns out to be more magnificent and openwork.

Otherwise, everything happens according to the same pattern as in the first case: the spiral rolls into a tube.

The tube is inserted into the hole of the disk, to which two green leaves are glued. The result is a more neat, but in its own way very beautiful rose.

Rose made of corrugated paper and wire

To bring to life another way of making a rose out of paper, you need to stock up on a corrugated sheet and thin wire that holds its shape well.

We cut out a fairly long and wide strip from the sheet.

We take the wire in our hands and carefully unwind it.

Winding paper onto wire

We continue to twist the paper.

All that remains is to twist it in a spiral and fluff the top edge even more. We twist the lower part well and fix it with a piece of wire, a drop of glue or thread. We get a lush rose head.

We cut out leaves from the corrugated sheet and glue them to the flower cup.

You can decorate any rose with this rose, or you can use it to make a bouquet. All you need to do is attach a stem to the flower head, which can be made from a kebab stick or a cocktail tube, wrapped in green adhesive tape or a green paper sheet.

Rose on a stem made of corrugated paper

A beautiful rose on a stem is made from colored corrugated paper. To do this, cut out two squares from corrugated paper and fold them in half. We twist one of the strips.

We wrap the twisted strip with a second strip of corrugated paper. We fix the paper at the base with threads.

We wrap the resulting bud in green paper.

We wrap the paper until we get a flower stem.

Cut out a leaf from green paper and glue it to the stem. A voluminous rose made of corrugated paper is ready!

You can make a whole bouquet of roses as a gift!

Rolled paper rose applique

Roses can be used to decorate a postcard or a paper figure - for example, a heart. To do this, you will need a sheet of paper of a suitable color, a pencil (or a simple round stick) and glue.

Using a pencil or stick, roll the paper into a roll. Cut it into several rolls of the same length.

We glue these small rolls onto a paper figure.

We supplement the composition with the same paper “leaves”. That's it!

Simple rose made from paper rectangles

One of the easiest ways to make a rose is to make it from paper rectangles. We cut rectangles from thin paper and stack them one on top of the other.

A paper rose is an excellent decorative item that you can make yourself using simple techniques. Paper roses can make your home interior unique and original and bring into it a piece of the warmth and energy of the master. A bouquet of paper roses, and even with sweets inside, can be an excellent alternative to a real bouquet of living ones. roses.

What can be decorated with artificial flowers?

Paper flowers are universal decorative items that can be used to decorate any interior. When composing a composition, flowers are often placed in vases, and the vases can be very different: both traditional and completely unusual, like a perfume bottle or a thread spool.

In country houses you can effectively decorate stair railings handmade flower garlands. Table setting with paper flower decor will be the highlight of your holiday. Another use is to decorate gift boxes and other accessories.

Almost all types of flowers can be made from paper: everyone’s favorite roses, delicate tulips, traditional carnations, exotic orchids and many others. Paper flowers are quite difficult to distinguish from real ones, but they will delight you with their beauty for much longer.

In this article, we have selected 4 master classes that will help you easily and simply create the “queen of flowers” ​​– a rose – with your own hands. Choose to your taste which option you like best:

1. from plain paper - the easiest and fastest way;
2. from corrugated paper;
3. origami;
4. bouquet of paper roses with sweets.

   Rose made from plain paper: the easiest and fastest way

   To create such a rose you will need:

   • a sheet of paper (the thicker, the more opportunities for further painting);
   • scissors;
   • glue.

   Step by step instructions:

   1. Cut out a circle from paper (choose the diameter yourself, the best option is 15-20 cm).
   2. Cut the resulting circle in a spiral.
   3. Roll the paper spiral very tightly, starting from the outer edge.
   4. We slightly straighten the resulting petals and glue the bud to the inner edge of the spiral.

      Advice! If you want a rose of a certain color, you can immediately select the appropriate colored paper. Another option is to decorate the white rose with gouache after creating it.

      Corrugated paper roses

      If you want to make roses as similar to real ones as possible, then you will need corrugated paper. This is a material that is very often used in decorative art. This paper looks beautiful, holds its shape well, is flexible and holds well. Let's consider one of the many techniques for creating a rose from corrugated paper with your own hands.

      We will need the following materials:

      1. corrugated paper;
      2. scissors;
      3. glue;
      4. wire.

      Cut out a long strip of corrugated paper (choose the height according to the desired size of the bud). We wrap a strip around the wire to create the base of the bud. Each turn must be lubricated with glue. We cut out petals of different sizes and shapes from paper (see photo) and glue them to the base. We use glue only on the bottom of the petal.

      Cut out the sepals from green corrugated paper and glue them to the base of the bud. All stages of creating such a rose can be seen in the photo:

      Origami

      Classic origami is the art of folding various shapes from a square sheet of paper without the use of glue or scissors. We will tell you how easy it is to make a rose using the origami technique.

      Master class with step-by-step photos.

      Bouquet of paper roses with sweets

      To give the blanks a shape like real rose petals, you need to stretch them with your fingers from the center to the edges along the entire length, without touching the edges.

      Cut out sepals from green corrugated paper.

      We stretch the paper on each piece of paper and curl the top edge a little.

      Attach the candy to the wire using thread.

      We wrap the wide petal around the candy so that it is not visible, and wrap the base of the petal with a thread to the wire.

      Similarly, we wrap the core with the remaining four wide petals at the same height.

      We fasten the narrow petals in twos so that they are located opposite each other.

      We secure the sepals at the base of the bud with floral tape.

Now we will tell you how to make a large and very beautiful rose. This magnificent rose is perfect for romantic and tender photo shoots. This rose can serve as an unusual setting for various events from birthdays to weddings. The most important thing is that making such a rose will not be difficult.

For our master class on creating a large rose from corrugated paper you will need the following materials (material is indicated for one rose):

• a roll of colored adhesive tape (you can also use tape, or corrugated paper, electrical tape, paper construction tape, the latter will then need to be painted green)
• double-sided corrugated paper (the color of the paper will determine the color of the bud)
• green paper for leaves (green);
• wire
• pencil or pen
• glue gun for needlework (one rod);
• templates prepared in advance from white paper for manufacturing: five small petals in the form of a drop; fifteen large petals in the shape of a heart; three for a leaf per stem; one accordion petal for sepal.

When you have prepared all the materials, move on to the instructions for creating a large rose.

How to make a big paper rose.

1. We take template blanks, colored corrugated paper and cut out petals and leaves (cut so that the paper strips are vertical):

- five small petals in the form of a drop;

- fifteen large petals in the shape of a heart.

Now take the green corrugated paper and cut it out:

- three for a leaf per stem;

- one accordion petal for the sepal.

2. Let's start forming the rose petals.

3. We take each petal in turn with both hands and stretch it from the center to the sides.

4. Let's start with the petals in the form of droplets, take a pencil or pen and twist them slightly, giving a slight curve to each petal for the rose bud.

5. Now we take the heart petals and curl the top of their edges with a pencil, first the right one, then the left one.

6. Your petals should look like the picture.

7. Next, let's prepare the stems. Let's take a wire and a roll of colored adhesive tape (you can also use tape, or corrugated paper, green electrical tape, paper construction tape, the latter will then need to be painted green). We wrap the stem from start to finish, pressing the corrugated paper or tape tightly to the wire with our own hands.

8. You should get a stem like in the picture.

9. Let's move on to creating the bud, namely the inner part of the rose. We take the first droplet-shaped petal and attach the tip to the stem (to the wire) using electrical tape or tape.

10. So, with each petal in the form of a drop, we attach it to the stem in turn.

11. You have completed the inside of the rose.

12. Once again, carefully wrap and secure the bottom of the petals with your hands.

13. Now we open the outer petals of the rose. For this we need heart-shaped petals.

14. We wrap each heart petal around the inside of the rose with a slight indentation from each other.

15. Carefully straighten and carefully secure each petal with colored adhesive tape.

16. When all the petals have been attached, we once again wrap the base of the rose bud with tape or electrical tape.

17. Half the battle is done - the bud is ready.

18. The rose should now look like the picture.

19. Now let’s take a petal from the blanks with an accordion for the sepal and wrap it around the base of the bud.

20. We wrap the sepal on top and secure it with tape or adhesive colored tape.

21. Now let’s take from the blanks three leaves on a stem of green corrugated paper, three wires and attach the leaves to each wire in turn. This can be done using a glue gun or regular PVA glue.

22. Fold it in half (the middle is the wire) and iron the gluing area with your own hands.

23. Straighten the sheet, it should look like in the picture.

24. Now apply a little glue to the base of the petal.

25. We wrap the wire (with the same paper that you originally used for the stem), starting from the base of the leaf where the glue was applied.

26. When winding, apply a little glue to the other end of the wire and turn the tip (here you can use double-sided tape).

27. Now we take all three blanks with leaves and distribute them evenly around the stele. We secure it with tape or colored adhesive tape to the stem.

28. Next, starting from the base of the bud and moving evenly to the end of the stem, we wrap it again with corrugated green paper.

29. Iron the paper well with your hands, especially pay attention to the bases where the branches with leaves are attached, in order for the rose to look harmonious, you need to do a thorough but neat wrapping at this point. We secure the ends of the paper, as we did in step No. 26.

30. Congratulations! Your gorgeous big rose is ready!

31. It should be approximately this size in relation to you.

32. It will look wonderful and impressive if you make a bouquet of an odd number of large roses!

If at any stage you have any difficulties, be sure to write in the comments, we will be happy to help you.

Flower bouquets are an elegant decoration, and homemade ones can compete with garden ones in terms of attractiveness. After watching the master class, anyone can make a charming rose, and this is a wonderful gift.

Easy method

Making a rose does not require much time, and pleasure comes not only from the result, but also from the process itself. Flowers can be used as decorative elements to decorate the interior of a room.

You need to prepare: glue, scissors, sketchbook, colored paper, in addition, find an original vase.

Stages of work:

• Cut a square with a side of 10 cm from a sheet of paper, choose the color scheme to suit your taste.
• Draw a spiral on the workpiece.
• Take scissors to carefully cut out the resulting part along the contours.
• Take the outer end of the spiral with your fingers and begin to twist it.
• Having finished forming the bud, secure the structure by gluing the end from the inside.
• Cut out a green leaf, coat its surface with glue and connect it to the bud.
• Attach the finished flower with a leaf to the end of the branch.

A gorgeous rose looks great; it needs to be placed in a beautiful vase with original decor.

Paper rose made of thick paper

Before you start, you need to prepare tape, scissors and thick paper for homemade work.

Stages of work:

• Bend the sheet in the middle and fold it in half again.
• Unfold the sheet and use scissors to cut the paper into 4 equal strips.
• Tape the ends of the strips together to create a long strip.
• Twist the paper strip, you should end up with a rod that will later be used as a stem.
• Fold the remaining paper in half, wrap it around the formed center and form the rosebud layer by layer.
• If the homemade product is white, then the finished product can be repainted in any shade of the rainbow palette.

Crepe paper rose

Prepare scissors, a simple pencil, glue or floral tape, a stick, and crepe paper.

Stages of work:

Make a template, draw a heart on a piece of paper, the size of the rose depends on its size, for example: the height of the heart can be 15 cm.

Using the template, cut out 5 or 6 hearts with scissors.

For the stem, connect 3 wires together, as an alternative, take a wooden stick, wrap the workpiece with floral tape, and also use glue.

To make petals, gently pull the paper horizontally in both directions. Wrap the edge of the heart on top of the stick, then wrap the petal around the stem and secure it with ribbon. Repeat the above steps with all the hearts.

The leaves are cut out in advance, then the wire is wrapped in paper and the finished leaves are glued.

To make a green rose cup, use a strip of corrugated paper. It is attached to the flower with tape or glue, place the leaves along the stem and complete the design of the stem.

Homemade rose using a template

This time for the queen of flowers you will need to prepare a template, scissors, a stick, a pencil, glue, and a printer.

Stages of work:

• Find a rose template on the Internet and download it to your computer.
• Print out the template, cut out petals with leaves from colored paper, an important detail - on the template, each element has its own number.
• Use scissors and bend the ends of each petal with them.
• Bend the green leaves twice in length.
• Wrap the skewer with a petal with number 1, fix the paper blank with glue.
• Around the first petal, wrap the second and third petals in turn, which also need to be secured with glue.
• Rose petals 4-7 will need to be glued together so that they take a cone shape.
• Gather the individual parts of the rose and glue them together.
• Choose the color of your choice; popular shades are pink, yellow, red and white.

Paper roses made from colored cardboard

Prepare scissors, glue, a simple pencil, and sheets of colored cardboard for this homemade project.

Stages of work:

• Draw a spiral on paper with a wavy line coming from the center.
• Use scissors to cut along the line you made to create a strip similar to an apple peel.
• Wrap the spiral around the pencil, wind it as tightly as possible until you reach the middle. Now remove the pencil and straighten the rose with your fingers.
• Apply glue in the middle, the adhesive should flow into the center of the spiral, press the homemade product.

Look at the photo of a paper rose, the beautiful homemade flowers look simply great, it’s impossible not to pay attention to it.

Corrugated rose

Take the following: corrugated paper, glue, scissors, stick.

Stages of work:

Fold the paper lengthwise and widthwise several times. Cut out the petals in the shape of hearts, with one cutout allowing you to complete all 8 pieces.

Press the petals a little between your fingers to make them look as natural as possible. Cut a paper strip 3 cm wide and apply glue evenly to its surface.

Place a small wire at one end of the tape and wrap a strip around it to form the core of the flower to which the petals are glued. Apply glue to the petals and glue to the central part of the flower.

Take green corrugated paper and fold it in half twice, cut out the petals, and wrap the stem with a green paper strip; before this, the wire should first be wrapped with foam rubber.

Knowing how to make a rose with your own hands, you can decorate any celebration in an original way; the queen of flowers is attractive in all her manifestations. An unusual flower looks great among decorations; it can give a festive mood to everyone around you.

To make a homemade product, you do not need any special skills, so after watching the video instructions, you can easily repeat all the steps in practice.

DIY paper rose photo

A bright bouquet of roses will bring life into any setting, it is a central accent that attracts everyone's attention. If a live rose withers quickly, there are many options to make it from paper. Let's look at the easiest options for making a paper rose with your own hands.

You can involve children in needlework; they will be happy to choose a beautiful rose, and a joint activity will entertain the whole family and develop their creative abilities.

Easiest method #1 using plain paper

We offer a master class with a description for beginners; it won’t take much time. For the flower, prepare: scissors, red (pink) thick paper, glue (adhesive tape), dry twigs and a small vase.

• Cut out a square of paper with sides of 10 cm (the color of the rose depends on the chosen paper).
• Draw a spiral over the entire square with a pencil; it is better to start from a point in the center, as in the photo.
• Using scissors, cut along the spiral line.
• Now we begin to roll the spiral from the outer corner.
• Twist the resulting bud (or opened flower) tightly and glue the tip for strength.

The rose is ready, you can start making leaves.

• Cut out a large leaf with sharp edges and glue it to the flower.
• Then carefully plant the flower on a branch.

Make several flowers with leaves and place them in a prepared vase.

Method No. 2 - origami

A rose will take about 5 minutes, but a whole bouquet with leaves looks more impressive. Choose 30 minutes to take your time with the kids.

Prepare: thick colored paper (red, purple, yellow, etc.) A4 size, PVA glue (adhesive tape), scissors.

Step-by-step instructions on how to make a rose:

• Cut long strips approximately 1 cm wide along the entire length of the A4 sheet.
• Take 1 strip and make folds inside the sheet, as in the diagram.
• The angles of the folds do not need to be made exactly; let them be different, the more unique the rose will be.
• We carefully begin to roll up our workpiece from the folded edge, without going into the free part.
• When you reach an untouched area of ​​the leaf, first fold the strip (see photo), then continue folding the flower.
• When finished (the rose will have different angles), the “tail” can be glued to the base of the rose.

• Fold the sheet (A4) in half along the sheet, then in half again. You should get 4 identical stripes.
• Cut the strips with scissors.
• Glue the ends of the strips with tape to make 1 long strip.
• We twist this strip to create a long flower stem.

The stem (leg) for the flower is ready. You can use dry twigs, twigs, and wrap the wire in green paper. Attach a rose to a branch (leg) and place the bouquet in a flowerpot.

Method No. 3 from corrugated

Flowers made from corrugated paper are incredibly impressive. This is a compressed fabric that can stretch. For making roses, paper made in Italy is better; it stretches better than Chinese or Taiwanese.

Let's look in detail at how to make a rose from corrugated paper.

Prepare:

• pink corrugated paper (if made in Italy, then No. 569), others are possible;
• green paper;
• wire (with winding);
• thin wire;
• ordinary plasticine;
• strong threads (any color);
• scissors;
• glue gun with 1 rod;
• wire cutters;
• piece of foil 18x14 cm.

Stages of work:

• Place a ball of plasticine on a thick wire, then wrap it in foil. Set aside for now. This will be the middle of the rose.
• We prepare rose petals; for this you need to cut out rectangles of different sizes from pink paper:
• 7 pieces 3.5 x 8 cm;
• 6 pieces 3 x 6 cm;
• 5 pieces 2.5 x 6 cm;
• 1 piece – 5 x 6 cm.

Important! You need to cut the pieces across the roll! Then cut off the upper corners and the lower part, the petal will be semicircular with a flat base. The direction of the corrugation should be along the petal!

Then you need to stretch the petals, press the central part with your thumbs, stretching the edges to the sides. The petal should bend.

Now we wrap 3-4 petals around the foil and secure them at the base with threads. We glue one petal at a time, each time with a slight shift. First we take the narrow petals, then the wide ones. When the rose is ready, all the petals are secured at the bottom with threads; you need to trim the corners.

Sepal (base of the rose): cut out a 10 x 6 cm rectangle from green paper. Make sharp teeth on one side of the green strip, twist the ends slightly. Wrap the bottom of the rose with green sepals, securing firmly with threads. Cut off excess, if any.

Cut 2 thin strips of green paper for the flower stem, 1-1.5 cm wide. Wrap the rose stem to the middle, do not cut. We make leaves according to the template - 12 pieces. Prepare 1 long wire (20 cm) and 2 10 cm each.

Then you need to glue the 2 halves of the sheet together by threading a thin wire inside it, so you can make 3 blanks, one of them will be longer. Then we connect all 3 wires together and wrap them in green paper into a group. Be sure to secure with glue.

We wrap the remaining end of the green paper to the end of the rose stem. So beautifully we will hide all the “tails” of the leaves. Our rose is ready.

It’s better to make more to create a whole bouquet of roses, in different colors. With each rose you will do better, more accurately and faster.

You can find many other interesting ideas for paper roses; we have chosen the simplest methods of execution. The main thing is your imagination; even identical roses made from multi-colored paper will look new.

Original options for making flowers in the photo: how to make a rose from paper.